Polysulphide Sealant

 

 

 

 

 

 

 

 

Hazardous ingredients % by weight Barium Oxide: 0.8
Calcium
Peroxide: 1.2
Toluene: 3.8


Spill / leak procedures:
1. Scrape up with cardboard and place in a container fitted with a lid.
2. Wear proper protective equipment

O.E.L - 100 ppm as toluene

Waste disposal procedure:
Can be land filled or burned in accordance with local regulations.

Extinguishing media: Co2
Foam
Dry power
Fine water spray

Special fire fighting procedures:
Use self-contained breathing equipment.

Unusual hazards: - none
Incompatibility: - none

Combustion/ pyrolysis:
Sulphur dioxide, Co2 and Carbon Monoxide, possibly Formaldehyde
and Hydrogen Sulphide.

Health hazard data:

Contact with skin: Wash of with soap and water
Contact with eyes: Flush with water. Obtain medical attention.
Inhalation: Remove to fresh air. Obtain medical attention.
Ingestion: Drink plenty of milk and obtain medical attention.

N.B HAZARDOUS INGREDIENTS:

All chemically based substances are potentially hazardous especially when treated without the care and attention they demand. Dow Corning Hansil are no different in this respect, although they are no more harmful than handling certain cleaning substances used regularly around the home. Precautions such as adequate ventilation, protection of skin and eyes, avoiding ingestion, sources of ignition and routine washing prior to eating or drinking should be observed in all cases as a mater of practice. This will protect from any inherent risks in the product.

COSHH (06/01)

MATERIAL SAFETY DATA SHEET

HANSIL 201 - POLYSULPHIDE