APPLICABLE PRODUCTS: SF900, SF901, SF903, SF905, SF908, SF909
CONTENTS:
Composition / information on ingredients
Hazards identification
First aid measures
Fire fighting measures
Accidental relase measures
Handling and storage
Exposure controls / personal protection
Physical and chemical properties
Stability and reactivity
Toxicological information
Disposal considerations
Transport information
Regulatory information
Other information
COMPOSITION:
Synthetic rubbers, polybutene and organic fillers, mineral oil and or hydrocarbon resins.
HAZARDS IDENTIFICATION; PHYSICAL AND ENVIRONMENTAL:
The product is generally inert in nature and should pose little hazard to the environment. The product is of generally low toxicity
FIRST AID MEASURES:
| INHALATION: |
Unlikely to be a cause for concern at normal working temperatures |
| EYE CONTACT: |
Irrigate eye thoroughly for at least ten minutes, holding the eye open, obtain medical attention if soreness or irritation persists or if in any doubt. |
| INGESTION: |
Wash out mouth with water, do not induce vomiting, seek medical advice. the product is difficult to ingest in large quantities due to its nature. |
FIRE FIGHTING MEASURES:
| SPECIAL PROTECTIVE EQUIPMENT: |
Provide suitable respiratory and eye protection for fire fighting personnel. |
| SUITABLE EXTINGUISHING MEDIA: |
Water, water spray, dry powder, or carbon dioxide type depending upon location and extent of fire. |
| SPECIAL EXPOSURE HAZARDS: |
Thick black smoke is produced and will include various oxides of carbon. |
ACCIDENTAL RELEASE MEASURES:
| METHODS FOR CLEANING UP: |
Pick and or scrape up clean residue with suitable detergent: dispose of in accordance with local and or national regulations. |
| PERSONNEL PROTECTION: |
The product may become tacky, if warm wear suitable protective gloves.
|
| ENVIRONMENTAL PROTECTION: |
Prevent from entering drains or water courses. |
STORAGE AND HANDLING:
Store in original containers away from direct heat and between 5 dgc and 25dgc.
EXPOSURE CONTROL/PERSONAL PROTECTION:
Respiratory protection not required at normal working temperatures.
PHYSICAL AND CHEMICAL PROPERTIES:
| APPEARANCE: |
A pressure sensitive, non setting elastic product in various colours. extruded onto release paper and supplied in roll form. |
| ODOUR: |
Very low at normal temperatures. |
STABILITY AND REACTIVITY:
| CONDITIONS TO AVOID: |
Generally stable avoid concentrated acids or alkalis or excessive heat. |
| HAZARDOUS DECOMPOSITION PRODUCTS: |
Not known. |
TOXICOLOGICAL EFFECTS: No data
DISPOSAL CONSIDERATIONS:
| DISPOSAL METHODS: |
Dispose in accordance with local and national regulations. |
OTHER INFORMATION:
| DATA SOURCES: |
Suppliers information |
| CHEMICAL NAME: |
Compound containing synthetic rubbers, polybutene, inorganic and organic fillers and mineral oil. may contain hydrocarbon resin. |
| FIRE AND EXPLOSION HAZARD DATA: |
Will decompose at temperature greater than 150 dg c. |
| FLASH POINT: |
Not applicable |
| HAZARDOUS DECOMPOSITION PRODUCTS: |
Various oxides of carbon and irritating smoke. |
ACCIDENTAL RELEASE MEASURES;
| PERSONNEL PROTECTION: |
The product may become tacky, if warm wear suitable protective gloves. |
| ENVIRONMENTAL PROTECTION: |
Prevent from entering drains or water courses. |
FURTHER INFORMATION:
| SOLUBILITY IN WATER: |
Insoluble |
| SPECIFIC GRAVITY: |
1.2 - 1.59 |
| VAPOUR DENSITY: |
Not applicable - 100% solids |
| VAPOUR PRESSURE: |
Not applicable |
| FREEZING POINT (TG): |
> - 40 dgc |
| PH : |
Not applicable |
| HAZARDOUS COMPONENTS: |
None declared |
| RISK PHRASES: |
Not required |
| SAFETY PHRASES: |
Not required |
| PRIMARY RISK: |
Flammable |
| ADR CLASS: |
n/a |
| TREMCARD NUMBER: |
n/a |
| HAZARDOUS CHEMICAL CODE: |
n/a |
| SECONDARY RISK: |
n/a |
| CONVEYANCE CLASS: |
n/a |
| IMCO CLASS: |
3.3 flammable |
| CPL RISK PHRASES: |
Not required |
| CPL SAFETY PHRASES: |
Not required |
