1. Identification of the substance / Preparation and the company
| Trade Name: |
HP500 |
| Description: |
Preformed strip sealant reeled onto paper or plastic release liner. |
Supplier:
Service: Tel: 01924 472251, Fax: 01924 440237
Emergency Number: 07703 517826
2. Composition / Information on Ingredients
| Chemical Characterisation: |
Homogeneous mixture of mineral filler, synthetic rubber, inert liquid polymer, process oil |
| Hazardous Ingredients: |
Contains no hazardous components |
3. Hazards Identification
The product is low hazard. Prolonged skin contact may defat and dry skin leading to possible irritation and dermatitis. Eye contact may cause smarting and irritation.
4. First Aid Measures
| Eye Contact: |
If contact of any material with the eye occurs, irrigate the area affected thoroughly with cold water. |
| Skin Contact: |
Wash affected area thoroughly with soap and water. |
| Inhalation: |
No first aid should be needed. |
| Ingestion: |
If confined to the mouth, do not swallow: wash out mouth with water. No first aid should be needed. If swallowed drink plenty of water and seek medical advice showing the container/label/safety data sheet. Do not induce vomiting. |
| Medical Treatment: |
If irritation of the eyes or skin persists seek medical attention. |
5. Fire Fighting Measures
This product is a low fire hazard and no special fire fighting measures are necessary.
| Suitable extinguishing media: |
Carbon dioxide, foam, dry powder, or fine water spray. Water can be used to cool fire exposed containers. |
| Unsuitable extinguishing media: |
None Known |
| Special protective equipment / procedures: |
A self contained respirator and protective clothing should be worn. Keep containers cool with water spray until well after the fire is out. Determine the need to evacuate or isolate the area according to your local emergency plan. |
| Combustion products: |
Carbon oxides and traces of incompletely burned carbon compounds. |
6. Accidental Release Measures.
| Personal precautions: |
Protective equipment is not normally necessary. Gloves should be worn where repeated or prolonged contact can occur. Avoid contact with eyes. Safety glasses should be. |
| Precautions to protect the environment: |
Keep away from drains and water courses. |
| Methods for cleaning up: |
Scrape up and place in a container fitted with a lid for disposal as solid waste. |
7. Handling and Storage.
| Advice on safe handling: |
General ventilation is recommended. Avoid skin and eye contact and do not swallow. Keep away from food and drink. Wash hands thoroughly with soap and water before eating or drinking. |
| Advice on storage: |
Store in cool dry conditions below 25'C and away from direct sunlight or heat sources. |
| Unsuitable packaging materials: |
None Known. |
8. Exposure Controls / Personal Protection
| Occupational exposure limit: |
Not applicable |
Personal protection equipment
| Respiratory protection: |
Not necessary but use in a well ventilated area |
| Skin Contact: |
Protective equipment is not normally necessary. Gloves should be worn where repeated or prolonged contact can occur. |
| Eye Protection: |
Avoid contact with eyes. Safety glasses should be worn. |
| Hygiene measures: |
Exercise good industrial hygiene practice. Wash after handling, especially before eating, drinking or smoking |
| Additional Information: |
None Known |
9. Physical and Chemical Properties
| Appearance: |
Soft, tacky, solid strip extruded and reeled onto paper or plastic release liner |
| Colours: |
Available in grey, white or black |
| Odour: |
Very low odour |
| Flash point: |
Not applicable. Does not support combustion. |
| Volatile content: |
Very low |
| Specific gravity |
1.6 g/cm3 |
| Water solubility: |
Insoluble in water. Some components soluble in organic liquids. |
*The above information is not intended for use in preparing product specifications.
10. Stability and Reactivity
| Stability: |
Stable at room temperature |
| Conditions to avoid: |
None established |
| Materials to avoid: |
None established |
| Hazardous decomposition products: |
During combustion carbon monoxide and carbon dioxide will be generated. |
11. Toxicological Information
| On contact with eye: |
May cause smarting and irritation |
| On skin contact: |
Prolonged contact may defat and dry skin leading to possible irritation and dermatitis |
| If inhaled : |
Not applicable |
| On ingestion: |
May cause irritation of the mouth, throat and digestive system and eventual vomiting. |
| Other health hazard information: |
Not Known |
12. Ecological Information
| Environmental fate and distribution: |
Contains a large proportion of inert fillers. Contains biodegradable and non - biodegradable components. |
| Ecotoxicity effects: |
Low aquatic and terrestrial ecotoxicity. Contains a large proportion of inert fillers. |
13. Disposal Considerations
| Product disposal: |
Dispose of product and containers as solid waste in accordance with local regulations e.g. incineration or landfill. DO NOT dispose of product to drain |
| Packaging disposal: |
Dispose of product and containers as solid waste in accordance with local regulations e.g. incineration or landfill. DO NOT dispose of product to drain |
14. Transport information
| Road / Rail (ADR/RID) |
Not subject to ADR/RID |
| Sea Transport (IMDG) |
Not subject to IMDG code |
| Air Transport (ICAO) |
Not subject to ICAO regulations |
15. Regulatory Information
Labeling according to EEC directive.
| Nature of hazard: |
No specific regulatory or labeling requirements |
| Hazard symbols: |
No specific regulatory or labeling requirements |
| R - Phrases: |
No specific regulatory or labeling requirements |
| S - Phrases: |
No specific regulatory or labeling requirements |
| EINICS: |
All ingredients listed or exempt |
16. Other Information
This product safety data sheet was prepared in compliance with Commission Directive 91/155/EEC, 67/548/EEC and 1994/45/EC as well as their relevant amendments, on the approximation of laws, regulations and administrative provisions relative to the classification, packaging and labeling of dangerous substances and preparation.
The product should only be used as stated in QBM Distributors Ltd literature. It is the responsibility of the persons in receipt of this Safety Data Sheet to ensure that the information contained herein is properly read and understood by all people who may use, handle dispose or in any way come in contact with the product.
All information and instructions provided are based on the current state of scientific and technical knowledge at the date indicated on the present SDS.
