IDENTIFICATION:
| Product name |
Seamseal BR |
| Description |
Gun applied soft paste for use as a sealant or adhesive |
COMPOSITION:
Homogeneous mixture of mineral filler, synthetic rubber, inert liquid polymer, white spirit.
Hazardous ingredients:
| Name |
CAS No |
% |
Symbols + risk phrases |
| White spirit |
64742 - 82 - 1 |
13 |
|
HAZARDS INDENTIFICATION:
Flammable.
FIRST AID MEASURES:
| Eyes: |
If contact of any material with the eye occurs, irrigate the area affected thoroughly with cold water. |
| Mouth (ingestion): |
In case if ingestion of any material, drink water and seek medical attention immediately. |
| Lungs (ingestion): |
Remove casualty from exposure into fresh air. |
| Skin: |
Wash affected area. |
* If irritation of the eyes or skin persists seek medical attention.
FIRE FIGHTING MEASURES:
| Suitable Extinguishing media: |
Foam, Foamspray AFF, Dry Powder, Carbon dioxide. |
| Unsuitable Extinguishing media: |
Do not use water. |
| Combustion products: |
Water, Carbon Dioxide, Carbon Monoxide, Incompletely burned carbon products. |
ACCIDENTAL RELEASE MEASURES
| Personal Precautions: |
Remove any source of ignition until all the material has been cleared. |
| Environmental Precautions: |
Keep away from drains and water courses |
| Clean up Proceedures: |
Small quantities of spilled material should be wiped up immediately with rags and the rags disposed of in a solid waste container. Larger quantities of material should be absorbed onto sand, shovelled into buckets and taken to a safe open space for evaporation before disposal into normal solid waste containers. |
HANDLING AND STORAGE:
| Handling: |
Ensure good ventilation and avoid breathing the vapour. Avoid contact with skin, eyes and do not swallow. |
| Storage: |
Store in cool dry conditions away from direct sunlight or any other source of heat, at temperatures below 25'C. |
EXPOSURE CONTROLS - PERSONAL PROTECTION:
| Occupational exposure limit |
100ppm ( 8 hour T.W.A. ).
125PPM ( 15 min. stel ) for White spirit
|
| Respiratory protection |
Avoid breathing the vapour. Maintain good ventilation. |
| Eye and skin protection |
Avoid contact with skin and eyes. |
PHYSICAL AND CHEMICAL PROPERTIES:
| Appearance: |
Gun applied soft paste filled in cartridges |
| Colour: |
Grey. |
| Odour: |
Solvent. |
| Flash point: |
47'C. |
| Solubility: |
Soluble in organic liquids insoluble in water. |
| Volatile Content: |
13.0% |
| S.G.: |
1.5 |
STABILITY AND REACTIVITY:
Stable at normal ambient temperatures.
TOXICOLOGICAL INFORMATION.
| Eye contact: |
May cause smarting and irritation |
| Skin contact: |
Prolonged contact will defat and dry skin leading to possible irritation and dermatitis. |
| Inhalation: |
Prolonged inhalation of high vapour concentrations can cause headache and nasea. |
| Ingestion: |
Maty cause irritation of the mouth throat and digestive system and eventual vomiting. |
ECOLOGICAL INFORMATION:
| Degradeability: |
Not biodegradeable. |
| Ecotoxicity: |
Aquatic and terrestrail ecotoxicity not known. |
DISPOSAL CONSIDERATIONS:
Dispose of in accordance with local regulations e.g incineration or landfill.
TRANSPORT INFORMATION:
| UNNO: |
Not applicable |
| Symbols: |
Not applicable |
No special packaging or labelling requiremnets for road, rail, sea, or air transport.
REGULATORY INFORMATION:
| Contains: |
White spirit. |
| R10: |
Flammable. |
| S2: |
Keep out of reach of children. |
| S16: |
Keep away from source of ignition - no smoking. |
| S24/25: |
Avoid contact with skin and eyes. |
| S51: |
Use only in well ventilated areas. |
OTHER INFORMATION:
This product safety data sheet conforms to EC Directive 91/155/EEC as well as its ammendments. the information provided is accurate to the best knowledge of the company.
