COMPOSITION / INFORMATION ON INGREDIENTS:
A self adhesive bitumen and modified rubber compound with an aluminium foil backing (may be lacquered depending on the finish specified). The adhesive layer is protected prior to use by a siliconised interleave.
HAZARDS IDENTIFICATION:
Not classified as hazardous during normal handling and use. Contact of bitumen with the skin may cause irritation. Handling during installation without gloves may result in cuts from the aluminium foil.
FIRST AID MEASURES:
| Skin Contact: |
Wash carefully using soap or a proprietary cleanser to remove. |
| Eye Contact: |
Irrigate to remove with copious amounts of water. Seek medical attention if irritation persists. |
| Inhalation: |
Normal use of the product does not present a hazard. |
| Ingestion: |
Seek medical attention if discomfort persists. |
FIRE-FIGHTING MEASURES:
| Extinguishing Media: |
Water spray, foam, carbon dioxide or dry powder. |
Further information:
The product will burn if heated and / or exposed to sources of ignition. Burning produces dense black smoke and toxic gases. Fire fighters should use self contained breathing apparatus when tackling the fire.
ACCIDENTAL RELEASE MEASURES:
Collect up and place in a suitable container pending disposal.
HANDLING AND STORAGE:
Store upright and in original packaging in a cool dry place away from direct sunlight. Do not expose to temperatures in excess of 50 dg C to prevent roll distortion.
EXPOSURE CONTROLS / PERSONAL PROTECTION:
The use of protective clothing and stout gloves to prevent cuts from the aluminium backing are recommended. The use of a proprietary barrier cream will aid the removal of the bitumen compound should contact occur. Do not eat, smoke or drink during use. Wash hands thoroughly after use.
PHYSICAL AND CHEMICAL PROPERTIES:
| Form: |
Rolls. |
| Colour: |
Laminate of bright metallic or dull lead like finish and black. |
| Odour: |
Bitumen |
| Flash Point (bitumen): |
Asphaltic. |
| Melting Point (bitumen): |
<150 dg C. |
| Solubility in Water (bitumen): |
115 - 135 dg C. |
| Hazardous Decomposition Products: |
Insoluble.
Practically Insoluble.
|
STABILITY AND REACTIVITY:
Stable and unreactive during normal use. The bitumen component will dissolve when in contact with organic none polar solvents.
TOXICOLOGICAL INFORMATION:
The bitumen component has moderate toxicity and is a moderate irritant. Some bitumen's may contain polycyclic aromatic compounds (PACs), some of which when made available by solvent dilution or poor personal hygiene and prolonged repeated skin contact, are suspected as carcinogens in humans.
ECOLOGICAL INFORMATION:
No information at this time.
DISPOSAL CONSIDERATIONS:
Product should be disposed of in accordance with local regulations using an approved landfill or by incineration.
TRANSPORT INFORMATION:
Not classified as hazardous for road, rail, sea or air transport. Flash point is above 150 dg C.
REGULATORY INFORMATION:
None currently known to apply.
OTHER INFORMATION:
The above information is offered in good faith and is based on our current knowledge and current legislation and as such QBM Distributors Ltd reserves the right to periodically review and update the information presented. It is intended to describe the product from a user safety view point. The user should make his own assessment from the information supplied and advise site personnel accordingly.
All technical chemical products can affect persons, especially those of a sensitive or allergic disposition. The wearing of appropriate personal protective clothing and safety equipment is recommended as a precaution. Persons with known sensitivity should avoid contact altogether. Always ensure that the application is appropriate for the product and that installation is carried out strictly in accordance with directions for use.
The user should regularly update himself regarding the current Safety Legislation affecting this product.
Further advice on the recommended applications and limitations of this product may be obtained by contacting the Sales Office.
