|
GENERAL DESCRIPTION:
A polycloth laminate tape coated with an aggressive pressure sensitive adhesive.
Gloss finish.
Easy tear.
Easy unwind.
Conformable to awkward shapes.
Water resistant finish.
Good abrasion resistance.
Non-corrosive adhesive.
TECHNICAL DETAILS:
Typical values
| Thickness |
0.22 mm |
| Breaking Load |
30 N / cm |
| Elongation |
10% |
| Adhesion |
Steel 3.7 N / cm
Self 2.3 N/cm |
|
Moisture Vapour
permeability
|
25g/m2/24hrs |
| Service Temperature |
-50 dg C to +65 dg C |
| Application Temperature |
+10dg C to + 45 dg C |
NOTE:
Except where indicated otherwise, the above figures are average values and should not be regarded as maximum or minimum values for specification purposes. The company reserves the right to improve products and any changes in specification will result in a re-issue of the relevant Technical Data Sheet. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the Technical Data Sheet. All slitting and length tolerances are to British standards.
Before use the customer is advised to consult Health and Safety sheet produced by the company for this product, which is available on request.
STORAGE:
Tapes stored below the minimum recommended temperature will require warming up to that level before use up to 24 hours may be required for this to take place.
TECHNICAL DATA (06/01)
AT271 POLYCLOTH LAMINATE TAPE
|
